Clicking the gear icon in the upper right corner of the main screen will take you to the Settings Panel for the DIRX2 App. In the Settings Panel a user can: Minimize Haptic Feedback – turns down the haptic feedback or vibrations used within the App. Show Tag Reader Notifications – alerts the user when […]

Write Tags will allow you to encode an NFC Tag to be able to be read by an NFC reader.  You have a few options within this function, where you can encode a tag with information from the DIRX2 system or with a specific Payload you type on your device. Bulk Actions With Bulk Actions, […]

Tap to scan will allow you to scan an NFC Tag or QR Code and get the Tag ID, Roll Id and Lot associated with the tag to use to compare to information within DIRX2.   You can use this function to confirm the actual Tag ID associated with a particular tag without executing the Experience […]

With the Add Tags function, you have the ability to move single Tags or groups of Tags among Lots in the DIRX2 Platform by simply tapping on the Tags. NOTE – YOU CANNOT CREATE LOTS WITHIN THE DIRX2 IOS APP, ONLY WITHIN THE DIRX2 PLATFORM. Begin by selecting Add Tags from the Main Menu. That […]

Within the DIRX2 IOS App there are three functions you can perform. Add Tags With Add Tags, you can move Tags between Lots in the system by tapping them with your IOS Device. Tap to Scan With Tap to Scan, you can scan an NFC Tag and get the Tag ID, Roll and Lot information […]

In order to use the DIRX2 IOS App, you need to have a company in DIRX2 and a login you can use. Without a company in the DIRX2 Platform, the DIRX2 IOS App does not add much value. You can log into the IOS App using the same login that you use to log in […]

Tapwow offers the DIRX2 IOS App which makes it easier to move tags to Lots and allows for the programming of blank NFC Tags with content from the DIRX2 Platform. With some navigation and some tapping from an IOS device, a person can simply work with tags within the DIRX2 platform. You can download the […]